Ultimax Archives - 91´ŤĂ˝ The World's Leading High Performance Brake Specialists Mon, 20 Apr 2026 12:40:11 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 /wp-content/uploads/2021/04/cropped-favicon-32x32.jpg Ultimax Archives - 91´ŤĂ˝ 32 32 EBC-Equipped Clubracer Team Secure Podium in Debut Roadsports Championship Outing /race-motorsport-articles-cars/ebc-equipped-clubracer-team-secure-podium-in-debut-roadsports-championship-outing/ Mon, 20 Apr 2026 12:39:08 +0000 /?p=42037 The post EBC-Equipped Clubracer Team Secure Podium in Debut Roadsports Championship Outing appeared first on 91´ŤĂ˝.

]]>

The driver duo uses a raft of 91´ŤĂ˝ Racing components on their Mk5 VW Golf GTI

The Clubracer racing outfit – made up of drivers Henry Wright and Kevin Glover – has relied on 91´ŤĂ˝ components as it has made its way up the ranks through the MSVR Trackday Championship classes.

This all culminated in an outright championship win in 2025 – a fantastic result for the team. Riding off this success, they’ve decided to move onto pastures new for the 2026 season, entering the 750MC Roadsports Championship in their modified Mk5 VW Golf GTI.

With a string of further upgrades applied over the winter, and retaining their winning Apollo Big Brake Kit/RP-X™ brake pad setup, the team approached the first round at Croft Circuit with an optimistic mindset.

Find out how it all panned out in their own words below…

“With the success of 2025 behind us, winning the MSVR Trackday Championship overall, we set our sights on a different goal for 2026: the Roadsports Championship hosted by 750MC would be where we plan to do battle. With a very similar format, but slightly higher power categories and faster pit stops, it sets a very different challenge.Ěý

“Over the winter, the car has received a slight power hike with a bigger turbo and supporting mods, along with some other minor upgrades. Rear brakes have been upgraded to factory Mk5 Golf R32 vented EBC plain discs, and Ultimax2 pads with slightly larger diameter; not necessarily for more brake force, but a more consistent temperature window, as the rears are worked quite hard with the OEM ABS system. This, matched with the now tried-and-tested EBC Apollo 6 pot 355x32mm front big brake kit, and our ‘go-to’ RP-X™ compound pads.”

“Round 1 was held at the Croft circuit near Darlington, with the weather looking to be mixed to say the least. Qualifying started in wet conditions. We readied the car with a known good wet setup and Kev rolled out to see where we were pace wise.

“Having no previous running against the new field of competitors (26 in our Class B!), it was a complete unknown at this stage. As Kev pulled in after his stint, we were sat in P2 initially – a great start! Henry jumped in for the final few laps with the track conditions improving quickly, but unfortunately a combination of traffic, an odd red flag due to a circuit electrical glitch, and various other racing driver excuses!, we ended the session in P5.

“Still a very respectable start to the campaign. It’s always been a bit of a disadvantage having 2 drivers in a sprint enduro format, as you lose half the session changing drivers and getting back up to speed, whilst single driver entrants keep lapping. Especially in changeable conditions.

Ěý“The new brake setup was proving a vast improvement in terms of feel and temperature consistency, so we were very happy with the confidence that was giving us in the bumpy braking zones.”

“The race was full of excitement, the weather constantly changing throughout. The rolling start went without issue and first five cars including us started to pull away from the remaining pack. With contact up ahead from a bold move into the Complex saw us take advantage and up to P3, using our normal measured approach. A lap later the leader went off going into the Complex too! P2.

“A few laps went by before the previous leading car of Packer was back on our rear bumper, he went through on the inside into the Complex, allowing all 3 leading cars to bunch up nicely heading down into Tower corner the following lap, where Packer re-took the lead. I ceased the opportunity to follow him through with a late brake manoeuvre both going past the leading Mk7 Golf back into P2.”

“On the way into the pits, a lapped Porsche Boxster held us up for half a lap, unfortunately meaning Kev came out the pits now in P4. Soon after Kev’s pit exit, there was a safety car due to a crashed Vauxhall Corsa, meaning it would be a 3-lap sprint to the end. The 3rdĚýplaced BMW Z4 seemed a long way ahead on the penultimate lap, with the added hassle of a lapped VW Scirocco in-between Kev and his target. A very committed move past the backmarker through the left hander of the Esses, subsequently forcing the BMW to out brake himself into Sunny-in. Kev lined up the move into the harpin after getting right up under the bumper through the Complex. taking the P3 spot!

“A podium first time out! Couldn’t be happier with that, especially with the quality of the machinery we were up against. The car was faultless through all the different conditions. Ultimate confidence on the middle pedal making the difference for us once again.ĚýĚý

“Next round – Brands Hatch GPĚýon May 3rd! Bring it on…”

Photo credits: Jonathan Elsey

Connect with the Clubracer team for more news and information:

RP-X™ Motorsport Pads

Following the hugely successful launch of RP-1™, 91´ŤĂ˝ Racing increases its motorsport brake pad range with the introduction of our latest ultra-high-performance track & race material, RP-X™. An out-and-out winner on track days and in motorsport situations.

View Product

Apollo Brake Calipers

Our brand new UK designed and made lightweight but strong aluminium 4 and 6 piston brake calipers. Which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated BBK is not yet made by EBC.

View Product

The post EBC-Equipped Clubracer Team Secure Podium in Debut Roadsports Championship Outing appeared first on 91´ŤĂ˝.

]]>
Suit Your Style: Modern EBC Brake Upgrades for Classic Cars /corporate-news/suit-your-style-modern-ebc-brake-upgrades-for-classic-cars/ Thu, 05 Mar 2026 15:57:56 +0000 /?p=41864 The post Suit Your Style: Modern EBC Brake Upgrades for Classic Cars appeared first on 91´ŤĂ˝.

]]>

We show you the 91´ŤĂ˝ components that perfectly match your lifestyle

Welcome back to our ‘Suit Your Style’ blog series, where we match you up with 91´ŤĂ˝ upgrades that complement particular driving requirements, ensuring you get the ideal components for your vehicle.

Next up, we focus on a corner of the automotive world that many are very passionate about: classic cars. Balancing modern stopping power whilst retaining that all-important character is something that owners take very seriously. Thankfully, 91´ŤĂ˝ is proud to be a trusted and reliable name for many historic vehicle owners, continually delivering the perfect stopping power for these cherished machines.

Below are some popular 91´ŤĂ˝ components that are suitable for classic cars.

Ultimax2

The perfect quality daily driver pad option for all modern cars: petrol, diesel, hybrid or electric.

These premium quality, British-made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The 91´ŤĂ˝ Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds, even on prestige cars, 4x4s and light trucks.

Ultimax pads feature centre slots, edge chamfers and Brake‑In surface coating to condition discs after installation and help to quickly deliver stopping power on new pads. Hardware and wear leads included where fitted as standard. Tests at the MIRA research facility prove that these pads typically stop faster then OE.

Greenstuff

In tests, Greenstuff has been proven to stop a vehicle 20ft shorter than using stock pads. Greenstuff pads are fully shimmed, chamfered and slotted for silent braking and also feature the EBC Brake‐In surface coating to accelerate pad bed‐in after installation.

These pads are made from a specially designed softer compound which gives a longer lifetime as well as improved pedal feel at lower speeds.

Standard D Discs

Undoubtedly one of the best-selling and most popular aftermarket brake rotors on sale worldwide, 91´ŤĂ˝â€™ D Discs offer OEM quality made to the exact same spec as original parts, using G3000 grey iron.

Precision machined, balanced and 100% one-by-one runout inspected to guarantee zero rotor distortion out of the box.

The quality and price point of the 91´ŤĂ˝ discs combined with the 10,000 mile/12 month warranty make these a best-buy brake part, equal to or better than original parts.

Availability

Available now. PleaseĚýĚýto find your local EBC stockist and see a full list of applications.

The post Suit Your Style: Modern EBC Brake Upgrades for Classic Cars appeared first on 91´ŤĂ˝.

]]>
Choosing the Best Brake Pads for the VW Golf /technical_ebc_brakes_blog/choosing-the-best-brake-pads-for-the-vw-golf/ Wed, 18 Feb 2026 12:01:22 +0000 /?p=41744 The post Choosing the Best Brake Pads for the VW Golf appeared first on 91´ŤĂ˝.

]]>

A straightforward guide to brake pad choices for the VW Golf, from daily driving to higher-performance setups

Let’s start with the key points to save you a long read. If you’re choosing brake pads for your VW Golf, these are the essentials you should be looking for:

  • High Performance
  • ECE R90 approval – required to drive legally in the EU and won’t invalidate your insurance
  • Lowest dust ratings
  • Great value for money

91´ŤĂ˝ gives you all of this and more, here’s how.

EBC offers a variety of brake pads for all different driving styles. We offer Redstuff™ ceramic brake pads which is a low dust option that can be used for street use. The next step up from this would be our Yellowstuff™, which is slightly dustier, however can handle harder driving styles. The next grade up after that would be our Bluestuff NDX™ which is an aggressive option that is also low dust, and can be used on both the street and track.

This brake selector chart should help you identify the right option for your VW Golf:

91´ŤĂ˝ Pad Selector Tool

There are also more unique advantages that no competitor can match:

  • British Made: Every component, including backing plates, tools, and materials, is manufactured in 91´ŤĂ˝’ UK factories.
  • Nucap NRS Hook System: 91´ŤĂ˝ utilizes the Nucap NRS hook system for backplates, ensuring superior pad adhesion and preventing pad separation.

Here is how NRS looks, and we do it all at our Northampton HQ:

And here is how we do it at our Northampton HQ:

More advantages of choosing 91´ŤĂ˝:

  • Best Lookup Data Online: 91´ŤĂ˝ provides detailed product information, including life-size product images and descriptions, ensuring customers know exactly what they are purchasing – something that competitors can’t match.
  • Best Technical Support: 91´ŤĂ˝ offers expert technical support from experienced professionals with 40 years of experience, ready to assist with any inquiries.
  • Matching Rotors and Calipers: 91´ŤĂ˝ offers high-quality rotors and calipers to complete your brake system upgrade. This includes 91´ŤĂ˝ Racings two-piece fully-floating rotors which most competitors can’t match. People often confuse two-piece rotors with floating rotors, two-piece rotors don’t and can’t float if they are bolted up solid.
  • Decades of Experience: 91´ŤĂ˝ has been manufacturing brake pads in a wide variety of materials for 45 years, continuously evolving and supporting customers and drivers. We are committed to providing quality products and service for years to come.

To purchase 91´ŤĂ˝ products, please visit:ĚýWhere to Buy.

The post Choosing the Best Brake Pads for the VW Golf appeared first on 91´ŤĂ˝.

]]>
Suit Your Style: EBC Brake Upgrades for Comfortable Daily Drivers /corporate-news/suit-your-style-ebc-brake-upgrades-for-comfortable-daily-drivers/ Tue, 17 Feb 2026 11:27:04 +0000 /?p=41729 The post Suit Your Style: EBC Brake Upgrades for Comfortable Daily Drivers appeared first on 91´ŤĂ˝.

]]>

We show you the 91´ŤĂ˝ components that perfectly match your lifestyle

Welcome to our new ‘Suit Your Style’ blog series, where we match you up with 91´ŤĂ˝ upgrades that complement particular driving requirements, ensuring you get the ideal components for your vehicle.

First up, we tackle undoubtedly the most common style of motoring out there: daily drivers. Whether it’s the work commute, popping to the shops or the long-distance family jaunt to the other side of the country, we all rely on decent, reliable brakes that can perform in a variety of situations on our daily-driven vehicles.

91´ŤĂ˝â€™ range of brake discs and rotors that match this style of driving is thankfully huge. There are a number of varying friction materials and rotor styles to choose from, offering subtly different characteristics when it comes to noise, performance, dust and cooling.

Below are some 91´ŤĂ˝ components that are suitable for daily-driven vehicles.

Brake Pads

Ultimax2

The perfect quality daily driver pad option for all modern cars: petrol, diesel, hybrid or electric.

These premium quality, British-made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The 91´ŤĂ˝ Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds, even on prestige cars, 4x4s and light trucks.

Ultimax pads feature centre slots, edge chamfers and Brake‑In surface coating to condition discs after installation and help to quickly deliver stopping power on new pads. Hardware and wear leads included where fitted as standard. Tests at the MIRA research facility prove that these pads typically stop faster then OE.

Greenstuff

In tests, Greenstuff has been proven to stop a vehicle 20ft shorter than using stock pads. Greenstuff pads are fully shimmed, chamfered and slotted for silent braking and also feature the EBC Brake‐In surface coating to accelerate pad bed‐in after installation.

These pads are made from a specially designed softer compound which gives a longer lifetime as well as improved pedal feel at lower speeds.

Redstuff

Ceramic particles (not fibres) enhance the aramid fibre formulation used in 91´ŤĂ˝ Redstuff to deliver powerful and long-lasting silent braking for the discerning driver.

They also offer excellent low dust characteristics – showing an improvement of around 20-25% compared to OE – ideal for those who prefer to clean their wheels less frequently.

Expect great all-round performance, low dust and minimal rotor damage characteristics from this fantastic all-rounder.

Brake Rotors

Standard D Discs

Undoubtedly one of the best-selling and most popular aftermarket brake rotors on sale worldwide, 91´ŤĂ˝â€™ D Discs offer OEM quality made to the exact same spec as original parts, using G3000 grey iron.

Precision machined, balanced and 100% one-by-one runout inspected to guarantee zero rotor distortion out of the box.

The quality and price point of the 91´ŤĂ˝ discs combined with the 10,000 mile/12 month warranty make these a best-buy brake part, equal to or better than original parts.

GD Discs

The latest in sport rotors, GD Discs feature wide aperture slots that draw cool air into the braking contact area and reduce temperatures, preventing brake fade.

Now featuring reduced three-slot venting which provides slightly less air noise under heavy braking whilst still maintaining the benefits of cooler running with the full-width slot design.

The design of these discs means that some wind noise is observed and if drivers feel they would find this offensive they are advised to select the quieter USR-series or the EBC plain (D) disc.

Another great feature of slotted discs is the way they maintain flat and parallel pad wear and avoid the record grooves or galling common with non-slotted discs. This improves pad contact and braking throughout the life of the disc and pad set.

USR Discs

Super-quiet sport-slotted brake discs, featuring the new 91´ŤĂ˝ narrow-profile slot pattern which helps cool and de-gas brakes under load and speed, but eliminates air noise common with some slotted discs.

Another great feature of slotted discs is the way they maintain flat and parallel pad wear and avoid the record grooves or galling common with non-slotted discs. This improves pad contact and braking throughout the life of the disc and pad set.

Another major benefit of the 91´ŤĂ˝ fine slotted discs is their ability to totally resist cracking common with ‘through-drilled’ discs.

BSD Discs

The new 91´ŤĂ˝ BSD-series brake discs vent the brake area better, drawing heat away from the central brake pad area and with more slot under the pad contact area.

These discs are totally silent in operation and de-gas your brakes when used at speed or under heavier loads minimising heat fade.

Now with lower pricing and the silver grey anti corrosion coating with show-thru silver slots, these discs are surely the best through-wheel looks and most functional sport discs on sale.

The fine slot pattern prevents the ribs that typically generate after 5,000-10,000 miles of use on non-slotted discs and maintain flat and parallel pad wear and due to the fine slot design can even extend pad wear life.

Availability

Available now. PleaseĚýĚýto find your local EBC stockist and see a full list of applications.

The post Suit Your Style: EBC Brake Upgrades for Comfortable Daily Drivers appeared first on 91´ŤĂ˝.

]]>
More Podiums for EBC-Equipped Trackday Championship Team /race-motorsport-articles-cars/more-podiums-for-ebc-equipped-trackday-championship-team/ Wed, 03 Dec 2025 15:09:14 +0000 /?p=41500 The post More Podiums for EBC-Equipped Trackday Championship Team appeared first on 91´ŤĂ˝.

]]>

The Clubracer outfit uses a raft of 91´ŤĂ˝ Racing components on its Golf

For many years, the Clubracer outfit – made up of drivers Henry Wright and Kevin Glover – piloted their Ford Fiesta in Class D of the Trackday Championship,Ěýsecuring multiple podium finishes and season wins along the way. Throughout this time, the duo relied on 91´ŤĂ˝ Racing’s motorsport brake pads to help them achieve such impressive results.

For the 2025 season, the team has moved up from Class D to Class B with their new race car – a turbocharged Mk5 VW Golf GTI. This more potent machine demands even more impressive stopping power, so the boys have opted for hard-anodised four-piston 91´ŤĂ˝ Racing Apollo brake calipers, two-piece fully floating discs and RP-X™/SR-21™ sintered race pads up front, as well as Yellowstuff pads and Ultimax grooved discs at the rear.

Following an incredible outright win at Donington Park, we next caught up with the team following their Oulton Park and Cadwell Park rounds in the second half of the year, where more consistent, solid driving ensured the trophies continued to come in.

Read all about it in their own words below…

Oulton Park International – Round 4

“Weather looked warm for the weekend – a nice change from the monsoon conditions of Donington where we scored the car’s maiden victory! We readied the car for qualifying. With very little changed from the last round apart from basic setup changes to adapt to the dry conditions, the EBC RP-X™ front pads combined with the Apollo 6 pot brake kit barely showing any signs of wear from the last round up front. The Ultimax 2 pads in the rear also showing signs of fantastic durability after 2 rounds in the rear. Again, we didn’t test prior to round so we had to make sure everything was on point prior so we could hit the ground running in Qualifying.

“The car instantly felt good, with a nice balance. This was the first proper use of the 6 pots in the dry. With some big braking zones at Oulton, it was clear good stopping capability would be essential as well as consistent feel for optimum performance. Managing to put the car right in the mix at the front was going to be critical to ensure we could capitalise. With 3rd place secured we did exactly that.”

“A quick bleed of the brakes to ensure fresh fluid was in the system, Henry lined up for the race start. With an aim of consolidating a podium finish, he set about the race start. Managing to defend some early attacks round the first corner he settled into the rhythm of the first lap. A committed move from fellow EBC-backed stablemate, Nicole Drought, into cascades saw us momentarily drop down to 4th place. The first 4 cars pulling away from the pack it was clear this was going to be a race of 2 halves! With a safety car intervention, the cars streamed into the pits bumper to bumper. A mis-judged stop by the Civic of Nicole would leave them unfortunately out of contention from that point onwards. Leaving the top 3 cars battling for the top step after Kev had taken over from the pit stop. With an impressive move on the Mk6 Golf of Jack and George Wright into Lodge Corner on the brakes early in his stint Kev set about chasing the super consistent Matt Swaffer in his 130i BMW. His pace was to be rewarded with the victory having defended a late charge from Kev finishing a mere 2 seconds behind. 2ndĚýplace! A great result. Making it 3 podiums finishes in row from the newly acquired Golf.

“The back-to-back podiums feeling very rewarding after all the hard work and early development with the car. – There’s still so much more to come too! Safe to say we’re very much in the right ballpark in the braking department though. The ability to drive hard all race long with such consistent pedal feel, and wear characteristics that are extremely impressive given their use and weight of the car. Next round Cadwell Park!”

Cadwell Park – Round 5

“Cadwell Park: not a firm favourite of Henry’s. However, Kev seems to enjoy it! You can guess who will be starting the race here for us… Despite not having a bad record here and generally going well, it’s not been a place I’ve ever really gelled with. This all changed a little bit when we rolled the car out for qualifying. Again, with no testing prior, we bolted a set of new tyres (the first new set since we started testing in April) and set about trying to get ourselves in contention with the host of front running cars that had tested the previous day. The car felt absolutely superb, With Henry and Kev both managing to lap within 2 tenths, albeit making time in totally different ways and sections of the track having looked at the data! The session finished with us 4thĚýoverall. Knowing that there was plenty left on the plate performance wise. The car’s brake balance with multitude of different corners and elevations was confidence inspiring to say the least.

“Kev started the race with it being one of his preferred tracks, and immediately got off to a good start making short work of 3rd place round the outside into turn 1. Immediately setting his sights on the BMW of Matt Swaffers who appeared to be struggling to get up to speed straight away. A challenge that lasted another 4 corners before Kev committed an excellent move down the inside into the downhill left hander at Mansfield, finishing the move into the entry of the mountain section. Up to second place on lap 1.”

“This set the tone for the whole first half of the race. With Kev and the Mk6 Golf of Jack and George Wright pulling clear of the rest of the pack. With the pit stops completed, Henry jumped in hoping to consolidate to great work Kev had started. After a couple of laps of adjustment to how the car was handling, and the gap to 1stĚýstable, Henry set about narrowing the gap to the Golf. Keeping an eye on the hard charging Civic of Nicole behind. With 1 lap to go, Henry was right on the bumper of the Golf having stabilised the gap to 3rd. A back marker decided to place himself right in the wrong place into turn one defusing any chance of lining up a pass at the end of the Park Straight frustratingly! With the narrowness and twistiness of the Cadwell Park Circuit, another passing opportunity wasn’t to present itself. Crossing the line a mere 0.2 seconds off the winning Golf. Ěý

“Another fantastic result in the bank. With the championship starting to take place, this leaves us leading Class B and 2ndĚýoverall. With 2 rounds to go, it’s going to be important to maintain the momentum! It’s all to play for! Next round Croft Circuit!”

Connect with the Clubracer team for more news and information:

SR-21™ Sintered Motorsport Pads

EBC sintered endurance SR-series pads are in a class of their own. Made in the USA plant of 91´ŤĂ˝, SR bites harder and lasts longer than anything, without damaging rotors. A truly capable endurance racing brake pads.

View Product

RP-X™ Motorsport Pads

Following the hugely successful launch of RP-1™, 91´ŤĂ˝ Racing increases its motorsport brake pad range with the introduction of our latest ultra-high-performance track & race material, RP-X™.

View Product

Apollo Brake Calipers

Our brand new UK designed and made lightweight but strong aluminium 4 and 6 piston brake calipers. Which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated BBK is not yet made by EBC.

View Product

The post More Podiums for EBC-Equipped Trackday Championship Team appeared first on 91´ŤĂ˝.

]]>
Outright Win for EBC-Equipped Clubracer Team at Donington Park /race-motorsport-articles-cars/outright-win-for-ebc-equipped-clubracer-team-at-donington-park/ Tue, 19 Aug 2025 09:06:24 +0000 /?p=41065 The post Outright Win for EBC-Equipped Clubracer Team at Donington Park appeared first on 91´ŤĂ˝.

]]>

The outfit has stepped out of its Fiesta and into the turbocharged VW for the 2025 season

For many years, the Clubracer outfit – made up of drivers Henry Wright and Kevin Glover – piloted their Ford Fiesta in Class D of the Trackday Championship,Ěýsecuring multiple podium finishes and season wins along the way. Throughout this time, the duo relied on 91´ŤĂ˝ Racing’s motorsport brake pads to help them achieve such impressive results.

For the 2025 season, the team has moved up from Class D to Class B with their new race car – a turbocharged Mk5 VW Golf GTI. This more potent machine demands even more impressive stopping power, so the boys have opted for hard-anodised four-piston 91´ŤĂ˝ Racing Apollo brake calipers, two-piece fully floating discs and SR-21™ sintered race pads up front, as well as Yellowstuff pads and Ultimax grooved discs at the rear.

With podium finishes clinched early on in the season, we next caught up with the boys as they completed their third round at Donington Park, where an outright win was secured for the team.

Read all about it in their own words below…

Round 3 – Donington Park GPĚý

“Round 3 of the Trackday Championship took us to the not so sunny Donington Park circuit in GP format.

“The Clubracer Golf had been subject to some upgrades after its impressive 3rdĚýplace at Silverstone, where it had shown good pace throughout the weekend despite its lack of testing, and our familiarity with the platform.

“The newly fitted EBC Apollo 6-pot Motorsport Big Brake kit grabbing the attention of many as we had the car up on stands preparing a full wet weather setup for the days racing. The 355mm x 32mm floating disc setup looking menacing behind the 18” wheels. With our old tried and tested EBC RP-X™ pads up front, combined with some Ultimax 2 rear pads, we had all the reason to be confident going into the weekend on the hardest track in the country on brakes.”

“With the rain falling hard before qualifying, and our total lack of testing in the wet with the Golf, it was a case of applying previous experience in setup and wet racing line to try and get the best of things. Championship leader Nicole Drought, in her 91´ŤĂ˝ Racing Apollo-equipped Civic Type R, was straight out the gate into provisional pole in the wet conditions, getting up to pace almost instantly. The first few laps were a case of finding the balance and grip forĚýHenry, who handed the car over to Kev at the session halfway point. With the Civic in the pits assuming it was job done, Kev set about the final lap in the session having the got familiar with the car and conditions very quickly as the rain eased slightly. A blistering lap putting the EBC/Helix Golf on pole by 2 tenths of a second as the flagged dropped, before Nicole could get a chance to respond. Locking out the front row with the EBC-equipped cars.

“With the rain falling harder and harder, Kev strapped himself into the car, ready to do battle. With the conditions as they were, race control opted for a rolling start to try and minimise risk. Kev got a great run and maintained the lead from the hard-charging Civic of Nicole. As the two leaders pulled a 14-second gap together away from 3rd place, the rain was still falling harder. Kevin showing absolute composure under pressure. A rare error from the Civic entering the infamous Craner Curves on standing water and proceeding impact with the tyre wall prompted a safety car, then a red flag as multiple cars required recovery in dangerous positions.”

“As the red lights fell for the standing restart, Kev again managed a faultless getaway, pulling clear of the field before pitting to change over toĚýHenry. The rain having eased slightly at the point he left the pits only to find a hard charging Charlie Palk in the distinctive lime green Scirocco (also equipped with EBC pads all-round on our recommendation) who was up to speed after his stop and filling up our mirrors. The gap changing constantly with the flow of back markers and traffic, withĚýHenryĚýmanaging to find some imaginative gaps along the way eventually breaking free slightly. With the hard work done, a few more laps managing the situation led to us bring the car home for its maiden win in the TDC.

“The new Apollo Big Brake Kit having performed faultlessly in combination with the standard ABS system. Untested and unknown, bolted on two days prior to the race meeting. Taking pole and the overall and class win a testament to the quality and performance we’ve relied on for the last four years.Ěý

“With the championship all of a sudden blown wide open, it’s all to play for heading into Round 4 at Oulton Park…”

Connect with the Clubracer team for more news and information:

SR-21™ Sintered Motorsport Pads

EBC sintered endurance SR-series pads are in a class of their own. Made in the USA plant of 91´ŤĂ˝, SR bites harder and lasts longer than anything, without damaging rotors. A truly capable endurance racing brake pads.

View Product

Apollo Brake Calipers

Our brand new UK designed and made lightweight but strong aluminium 4 and 6 piston brake calipers. Which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated BBK is not yet made by EBC.

View Product

The post Outright Win for EBC-Equipped Clubracer Team at Donington Park appeared first on 91´ŤĂ˝.

]]>
Clubracer Duo Excel in EBC-Equipped Golf GTI at Silverstone /race-motorsport-articles-cars/clubracer-duo-excel-in-ebc-equipped-golf-gti-at-silverstone/ Tue, 29 Apr 2025 12:26:42 +0000 /?p=40497 The post Clubracer Duo Excel in EBC-Equipped Golf GTI at Silverstone appeared first on 91´ŤĂ˝.

]]>

The outfit has stepped out of its Fiesta and into the turbocharged VW for the 2025 season

For many years, the Clubracer outfit – made up of drivers Henry Wright and Kevin Glover – piloted their Ford Fiesta in Class D of the Trackday Championship, securing multiple podium finishes and season wins along the way. Throughout this time, the duo relied on 91´ŤĂ˝ Racing’s motorsport brake pads to help them achieve such impressive results.

For the 2025 season, the team has moved up from Class D to Class B with their new race car – a turbocharged Mk5 VW Golf GTI. This more potent machine demands even more impressive stopping power, so the boys have opted for hard-anodised four-piston 91´ŤĂ˝ Racing Apollo brake calipers, two-piece fully floating discs and SR-21™ sintered race pads up front, as well as Yellowstuff pads and Ultimax grooved discs at the rear.

With a few engine complications during the first round, we catch up with the Clubracer team at round two of the season at Silverstone’s mighty GP circuit, where they managed to secure a podium position following some impressive driving.

You can hear how the weekend panned out in the team’s own words below…

Round 2 – Silverstone GPĚý

“Round 2 took us to sunny Northamptonshire and Silverstone Circuit – home of the British GP. A rare club motorsport visit to the full GP circuit.

“With the engine issues of Round 1 behind us, and the car clad with some new EBC SR-21™ pads, and new two-piece floating discs in combination with the beautiful hard anodised four-pot callipers up front, as well as EBC Yellowstuff matched with Ultimax grooved discs on the rear, we were confident of a better weekend!

“Qualifying is always a compromise with two drivers, due to the required mandatory driver change. Once you’re up to speed, you have to change drivers. All within the 25-minute session time. This made even harder with a long lap time, with the in and out laps. That said, we quickly got to grips with task in hand and made the best of the 3-4 laps we had each… Putting the car on the second row of the grid in 4th.”

“The race itself started with a sizable safety car period after a start-line collision which neutralised things whilst they recovered cars, and ensured drivers were ok – thankfully that being the case.

“Once the safety car peeled in, the top four cars including our Golf, made a break from the rest of the pack. Henry had the best view of the battle between 2ndĚýand 3rdĚýplace which he positioned himself in prime position waiting for any opportunity. Carefully waiting and watching the battle unfold, aware that they were compromising themselves in the hunt for the lead!

“The battle headed all the way into the pits, where the swift driver change, and perfectly timed exit saw us come out in a favourable 3rdĚýposition overall. Kev making the sensible decision to manage the race and get some very good points and podium finish under our belts by not getting in any trouble and confirm our position as a top Class B contender this year.

“A very respectable finish in our first race finish with the car! There is so much more to come, and development to exploit yet.

“The braking package is testament the EBC products we are used to. Being able to sustain the temps and harsh usage required to be the front. The confidence in the package is critical to any success.”

Connect with the Clubracer team for more news and information:

SR-21™ Sintered Motorsport Pads

EBC sintered endurance SR-series pads are in a class of their own. Made in the USA plant of 91´ŤĂ˝, SR bites harder and lasts longer than anything, without damaging rotors. A truly capable endurance racing brake pads.

View Product

Apollo Brake Calipers

Our brand new UK designed and made lightweight but strong aluminium 4 and 6 piston brake calipers. Which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated BBK is not yet made by EBC.

View Product

The post Clubracer Duo Excel in EBC-Equipped Golf GTI at Silverstone appeared first on 91´ŤĂ˝.

]]>
Product Focus: 91´ŤĂ˝â€™ Bluestuff™ NDX Brake Pads /corporate-news/product-focus-ebc-brakes-bluestuff-ndx-brake-pads/ Wed, 05 Mar 2025 16:10:51 +0000 /?p=40295 The post Product Focus: 91´ŤĂ˝â€™ Bluestuff™ NDX Brake Pads appeared first on 91´ŤĂ˝.

]]>

Each week, we put another acclaimed 91´ŤĂ˝ component under the spotlight

If you attend regular track days or even club racing events, but also drive your car to and from these meetings (or use it on the road in general), 91´ŤĂ˝â€™ Bluestuff™ NDX is designed for you.

Bluestuff™ NDX perfectly spans the gap between race and road, offering fast bed-in and perfect road-going characteristics, combined with phenomenal, reliable braking performance when you start to push harder.

Now with R90 approval on most applications (please check before purchasing), Bluestuff™ NDX is a solid all-rounder for those who take braking performance very seriously.

Its impressive capabilities mean Bluestuff™ NDX is also a great choice for heavy 4×4 and armoured vehicles which also demand high braking performance throughout the temperature range.

Bluestuff™ NDX carries the prestigious Leaf Mark, with the highest N rating – recognised for its superior environmental safety. This brake pad is proudly crafted in 91´ŤĂ˝â€™ friction factory in Bristol, UK.

Please note: for more extreme motorsport/racing brake components, please check out the 91´ŤĂ˝ Racing-branded range of products.

Pad colour:

Blue

Friction rating:

0.52mu

R90 approved?

For most applications – please check yours before purchasing

Ideal driving styles:

Fast road and lighter track work (full track days and entry-level club racing)

To get the most out of Bluestuff™ NDX, it’s highly recommended you follow 91´ŤĂ˝â€™ latest advice when it comes to road and track bedding-in procedures. Please click here for the latest advice.

– Find out more about Bluestuff™ NDX and the various applications byĚýclicking here.

The post Product Focus: 91´ŤĂ˝â€™ Bluestuff™ NDX Brake Pads appeared first on 91´ŤĂ˝.

]]>
Product Focus: 91´ŤĂ˝â€™ Yellowstuff™ Brake Pads /corporate-news/product-focus-ebc-brakes-yellowstuff-brake-pads/ Thu, 27 Feb 2025 12:13:29 +0000 /?p=40229 The post Product Focus: 91´ŤĂ˝â€™ Yellowstuff™ Brake Pads appeared first on 91´ŤĂ˝.

]]>

Each week, we put another acclaimed 91´ŤĂ˝ component under the spotlight

There’s a reason that Yellowstuff™ has been 91´ŤĂ˝â€™ most popular brake pad formula for several decades, as it effortlessly offers the perfect balance of day-to-day useability with a hefty dose of high-performance capability when you need it.

Designed as a sports brake pad for the likes of sports sedans and hot hatches, Yellowstuff™ is as comfortable on the daily commute as it is on the occasional track day.

Its copper-free make-up means it’s also an environmentally friendly option, boasting prestigious features that other EBC products do, such as the ‘Brake-In’ easy bedding-in coating and the coveted ‘Leaf Mark’ certificate.

Yellowstuff™ is proudly crafted in 91´ŤĂ˝â€™ friction factory in Bristol, UK.

Pad colour:

Yellow

Increase in braking performance (over OEM):

15%

R90 approved?

Yes

Ideal driving styles:

Faster street driving for sports vehicles, along with occasional track day use

Yellowstuff™ stays on the road-friendly side of the driving spectrum, meaning that you must pay particular attention to correct bedding-in procedures but if you are venturing onto track, our current suggestion is to use the Bluestuff™ formulation, or a product from the 91´ŤĂ˝ Racing range.

– Find out more about Yellowstuff™ and the various applications byĚýclicking here.

The post Product Focus: 91´ŤĂ˝â€™ Yellowstuff™ Brake Pads appeared first on 91´ŤĂ˝.

]]>
Product Focus: 91´ŤĂ˝â€™ Redstuff™ Brake Pads /corporate-news/product-focus-ebc-brakes-redstuff-brake-pads/ Wed, 19 Feb 2025 12:06:35 +0000 /?p=40194 The post Product Focus: 91´ŤĂ˝â€™ Redstuff™ Brake Pads appeared first on 91´ŤĂ˝.

]]>

Each week, we put another acclaimed 91´ŤĂ˝ component under the spotlight

Looking for a low-dust brake pad? Look no further than 91´ŤĂ˝â€™ Redstuff™ compound.

A non-metallic brake pad with zero steel fibres, this copper-free organic brake pad is enhanced with ceramic granule, resulting in extremely minimal brake dust and a very long lifespan. Due to its organic make-up, the minimal dust you will see after heavy use is very easily removed with a simple sponge wash.

Despite these incredibly wheel-friendly characteristics, Redstuff™ also boasts the same impressive performance and useability features of other EBC products, including the ‘Brake-In’ easy bedding-in coating and the prestigious ‘Leaf Mark’ certificate.

Redstuff™ is proudly crafted in 91´ŤĂ˝â€™ friction factory in Bristol, UK.

Pad colour:

Red

Increase in braking performance (over OEM):

10-15%

R90 approved?

Yes

Ideal driving styles:

Faster street driving for prestigious and sports vehicles

Redstuff™ is a great choice for prestigious or sports cars with particularly prestigious/intricate wheel designs, for those who want to retain their vehicle’s good looks whilst improving braking performance.

– Find out more about Redstuff™ and the various applications by clicking here.

The post Product Focus: 91´ŤĂ˝â€™ Redstuff™ Brake Pads appeared first on 91´ŤĂ˝.

]]>