Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK052RED-1 (Racing Red)
• BBK052BLU-1 (Storm Shadow Blue)
• BBK052BLK-1 (Stealth Black)
• BBK052YEL-1 (Luminous Yellow)

– Applications:

Suitable for the following vehicles:

• Mitsubishi Lancer Evolution X (2008-2016)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC Balanced Big Brake Kit is supplied with EBC Bluestuff pads for both front and rear axles. Unlike other ‘big brake kits’, which solely supply parts for the front axle, EBC includes matching Bluestuff brake pads for the rear axle at zero additional cost. This ensures your vehicle ends up with an optimum brake balance and the rear axle shares a portion of the braking load, giving improved control under braking and shorter overall stopping distances
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

SG Swept & Grooved Solid Rear Discs

• Disc pattern matches those of the front floating discs, designed for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application

Stainless Steel Braided Brake Lines

• Every kit is supplied with EBC Brake’s stainless-steel braided brake lines front and rear. Also including rear lines is another market first from EBC and one that ensures that every EBC Balanced Big Brake Kit includes every single piece of hardware you need to result in a truly balanced performance brake upgrade
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK047RED-1 (Racing Red)
• BBK047BLU-1 (Storm Shadow Blue)
• BBK047BLK-1 (Stealth Black)
• BBK047YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• BMW 3-Series (E36 – ’92-’99) (318i, 318ic, 318is, 353ic, 323is, 325i, 325ic, 325is, 328i, 328ic, 328is)
• BMW 3-Series (E46 – ’99-‘05) (323Ci, 323i, 325Ci, 325i, 325xi, 328Ci, 328i)
• BMW Z3 (E36/7 and E36/8 – ’96-’02) (1.9. 2.3, 2.5, 2.8, 3.0)
• BMW Z4 (E85 and E86 – ’03-’08) (2.5i M54, 3.0i M54, 3.9i N52, 3.0si N52)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK046RED-1 (Racing Red)
• BBK046BLU-1 (Storm Shadow Blue)
• BBK046BLK-1 (Stealth Black)
• BBK046YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• Nissan 350Z (2002-2009)
• Infiniti G35 (2003-2008)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK045RED-1 (Racing Red)
• BBK045BLU-1 (Storm Shadow Blue)
• BBK045BLK-1 (Stealth Black)
• BBK045YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• BMW M3 E46 (2000-2006)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm or 380x36mm – both rotor diameter options available

– Part Numbers:

(355mm Rotor Diameter Options)

• BBK044RED-1 (Racing Red)
• BBK044BLU-1 (Storm Shadow Blue)
• BBK044BLK-1 (Stealth Black)
• BBK044YEL-1 (Luminous Yellow)

(380mm Rotor Diameter Options)

• BBK044RED-2 (Racing Red)
• BBK044BLU-2 (Storm Shadow Blue)
• BBK044BLK-2 (Stealth Black)
• BBK044YEL-2 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• Nissan Z (2022-) in ‘Proto Spec’ and ‘Performance’ trim levels (not suitable for ‘Sport’ models)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Rotors

• Fully-floating 355x32mm or 380x36mm two-piece rotors that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends rotor life and reduces the tendency for rotor cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Rotor rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK036RED-1 (Racing Red)
• BBK036BLU-1 (Storm Shadow Blue)
• BBK036BLK-1 (Stealth Black)
• BBK036YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• Nissan 370Z (2008-2021)
• Infiniti G37S (2008-2015)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 380x36mm

– Part Numbers:

• BBK037RED-1 (Racing Red)
• BBK037BLU-1 (Storm Shadow Blue)
• BBK037BLK-1 (Stealth Black)
• BBK037YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• Honda Civic Type R (FK8) (2017-2021)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 380x36mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK041RED-1 (Racing Red)
• BBK041BLU-1 (Storm Shadow Blue)
• BBK041BLK-1 (Stealth Black)
• BBK041YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• BMW M135i (F20/F21) (2012-2015)
• BMW M235i (F22/F23) (2014-2016)
• BMW M140i (F20/F21) (2015-2019)
• BMW M240i (F22/F23) (2015-2021)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 380x36mm

– Part Numbers:

• BBK042RED-1 (Racing Red)
• BBK042BLU-1 (Storm Shadow Blue)
• BBK042BLK-1 (Stealth Black)
• BBK042YEL-1 (Luminous Yellow)

– Applications:

Suitable for the front axles of the following vehicles:

• Toyota GR Supra (2019- ) (all six-cylinder variants)

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 380x36mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.

Notes

– Dimensions: 355x32mm

– Part Numbers:

• BBK039BLK-1 (Stealth Black)
• BBK039BLU-1 (Storm Shadow Blue)
• BBK039YEL-1 (Luminous Yellow)
• BBK039RED-1 (Racing Red)

– Applications:

Suitable for the front axles of the following vehicles:

• BMW M135i xDrive F40 (2019- )
• BMW M235i xDrive Gran Coupe F44 (2019- )

For a complete list of vehicle applications, .

Apollo-Series 6-Piston Calipers

• EBC’s lightweight-yet-strong aluminium 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris
• Lightweight, hard-anodised aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity – this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow and Racing Red

Fully-Floating Two-Piece Discs

• Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Disc rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention

Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Stainless Steel Braided Brake Lines

• Every kit is supplied with 91´«Ã½â€™ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Availability

Available now. Please to find your local EBC stockist and see a full list of applications.